American Cylinder : Magnetic Field Cylinders

MFC^® Series
Magnetic Field Cylinders

Models
Single Acting and Double Acting

Mounts
Nose, Universal, Block Front, Block Rear,
Block Front & Block Rear Trunnion

Bore Sizes
9/16, 3/4, 1-1/16, 1-1/8, 1-1/4
1-1/2, 1-3/4, 2, and 2-1/2 inch

Click here to request this catalog
Click here to view this catalog

STAINLESS STEEL SERIES:
Type 304 Stainless Steel cylinder body manufactured to special mill specifications and tolerances to insure a long cylinder life.
ALUMINUM SERIES:
Cylinder body of hard coating I.D. Aluminum Tubing has extreme hardness, excellent wear and seizure resistance, low coefficient of friction and high corrosion resistance.
STAINLESS STEEL ROD:
Ground & Polished Type 303 Stainless Steel rods are standard on all models. All rods have wrench flats and stress relief grooves (9/16" bore excluded).
PISTON ROD ASSEMBLY:
Piston Rods are threaded, anaerobically sealed, and machine staked into the piston for triple protection.
END CAPS & PISTON:
High strength aluminum alloy.
MAGNET FOR SENSING SWITCH ACTUATION:
Internal magnet specially designed for use with American Reed or Hall Effect Switches.
SPRINGS:
Springs for spring action cylinders are made from music wire and designed for millions of cycles. Special spring forces are available.
ROD GUIDE BUSHING:
Standard on all models. The oil impregnated sintered bronze bushing increases the life of the cylinder rod and provides a non-abrasive bearing surface.
BUNA-N U-CUP ROD & PISTON SEALS:
U-Cup seals provide low breakaway friction and maximize cylinder life expectancy. Standard Buna-N seals are recommended for operating temperatures of -20^oF (-25^oC) to 200^oF (95^oC). Fluoroelastomer seals are available upon request.
PIVOT PIN/PIVOT BUSHING:
Stainless Steel Series cylinders are shipped with plated steel pivot pins as standard. Sintered bronze pivot bushings are available as an alternative standard option. (5/16", 1-3/4" & 2" bores supplied with pivot bushings only.)
ROD SEAL:
Precision machined rod seal groove provides a smooth sealing surface while positively retaining the seal without requiring additional components and relying on press fit containment.

[Home Page] | [Low Profile Cylinders] | [Non Repairable Air Cylinders]
[LSC® Series- Linear Slide Cylinders] | [Tie Rod Cylinders] | [Right Angle Flow Controls]
[AMERICAD™ Software] | [Product Catalogs Request Form]
[Company Profile] | [Contact Us]

Please E-Mail us at: info@americancylinder.com
Copyright 2003 American Cylinder Co., Inc.

[Home Page] | [Low Profile Cylinders] | [Non Repairable Air Cylinders] [LSC® Series- Linear Slide Cylinders] | [Tie Rod Cylinders] | [Right Angle Flow Controls] [AMERICAD™ Software] | [Product Catalogs Request Form] [Company Profile] | [Contact Us]

Please E-Mail us at: info@americancylinder.com Copyright 2003 American Cylinder Co., Inc.

[Home Page] | [Low Profile Cylinders] | [Non Repairable Air Cylinders]
[LSC® Series- Linear Slide Cylinders] | [Tie Rod Cylinders] | [Right Angle Flow Controls]
[AMERICAD™ Software] | [Product Catalogs Request Form]
[Company Profile] | [Contact Us]

Please E-Mail us at: info@americancylinder.com
Copyright 2003 American Cylinder Co., Inc.